行業資訊

濟南瀝青料拌合質量受什么因素影響

來源：http://m.shainiao.com.cn/ 日期：2022-05-05

　　瀝青料是常見的施工材料，使用頻率還是比較高的，當然施工期間少不了一定環節或者過程的發揮作用，比如說瀝青料拌合質量就非常的關鍵，那么會受到什么因素影響呢？

　　Asphalt is a common construction material, the use frequency is still relatively high, of course, during the construction period, certain links or processes play a role, such as asphalt mixing quality is very key, so what factors will affect it?

　　原材料質量的影響

　　粗骨料中的軟石和片狀顆粒會對瀝青材料的質量產生很大影響；細骨料包括石屑、人造砂和天然砂。一般來說，應謹慎使用。人造機制砂是一種理想的路面細骨料。天然沙子通常是酸性石頭，對瀝青的附著力很差。應與其他細骨料配合使用。

　　The impact of raw material quality

　　Soft stone and flake particles in coarse aggregate have a great influence on the quality of asphalt materials. Fine aggregate includes stone chips, artificial sand and natural sand. In general, it should be used with caution. Artificial machine-made sand is an ideal aggregate for road surface. Natural sand is usually an acidic stone with poor adhesion to asphalt. Should be used with other fine aggregate.

　　軋制質量控制

　　軋制質量與軋制溫度有直接關系。由于攤鋪后瀝青材料的溫度不斷下降，特別是在攤鋪后4～15分鐘內，溫度下降可達每分鐘1～5攝氏度，所以要把握好碾壓時機，及時碾壓。如果遇到低溫、高濕、大風等氣候條件，會縮短有效軋制時間，增加軋制難度。在軋制過程中，保持恒定的軋制速度也很重要。

　　Rolling quality control

　　Rolling quality is directly related to rolling temperature. Because the temperature of asphalt material decreases continuously after paving, especially in 4 to 15 minutes after paving, the temperature can drop up to 1 to 5 degrees Celsius per minute, so we must grasp the timing of rolling, rolling in time. In case of low temperature, high humidity, strong wind and other climatic conditions, the effective rolling time will be shortened and the rolling difficulty will be increased. It is also important to maintain a constant rolling speed during the rolling process.

　　攪拌溫度控制

　　濟南瀝青料溫度過低，會影響攤鋪和碾壓的質量，也會造成碾壓困難。但是，如果溫度過高，會導致瀝青老化變硬，使瀝青材料的性能變差。因此，混合時應嚴格控制混合溫度。建議批式攪拌設備每盤攪拌時間在45秒到50秒之間，其中干混時間不少于5秒到10秒，以瀝青材料混合均勻?yàn)闃?biāo)準。

　　Stirring temperature control

　　Ji 'nan asphalt material temperature is too low, will affect the quality of paving and rolling, will also cause rolling difficulties. However, if the temperature is too high, it will lead to aging and hardening of asphalt, so that the performance of asphalt material becomes poor. Therefore, the mixing temperature should be strictly controlled when mixing. It is recommended that the mixing time of batch mixing equipment should be between 45 seconds and 50 seconds for each plate, and the dry mixing time should be no less than 5 seconds to 10 seconds. The asphalt material should be evenly mixed as the standard.

　　濟南瀝青料拌合質量受什么因素影響？在此講解了三個方面的影響，希望對您的施工有所幫助，更多相關內容您可以來我們網站m.shainiao.com.cn咨詢了解。

　　Ji 'nan asphalt mixing quality by what factors? In this paper, three aspects of the impact, I hope to help your construction, more relevant content you can come to our website m.shainiao.com.cn to consult.

上一條：裝載機定期保養要求以及相關內容整理

下一條：挖掘機全車無力動作慢的解決方法